1. Stonex Epoxy 150UV is Most Suitable for Automatic Resin Line.
  2. Stonex Epoxy 150UV is used to fill /rectify cracks/pin holes with good Adhesive Strength & penetration.
  3. It is very useful on Italian Marble where big holes appears or having Cracks.
  4. When fully coated on Italian Marble/Katni Marble,It will give Excellent gloss & enhance natural Structure /grains of the Marble.
  5. Most useful on Resin Line where good leveling &defaming is required.
  6. Suitable for Italian Marble/Katni Marble/Beige Marble/Alaska.
  7. Heat the Raw Slab ,apply Stonex 150UV with brush /roller at then again send it to resin line for heating up to 40-60o C for 2-3 Hours,Laminated Glossy finish Slab,Obtained.
  8. Useful on Artificial Epoxy Slab, Semiprecious ,Stone Slab & Epoxy Flooring.
  • Mixing Ratio: 2 part Resin + 1 Part Hardner 100 Part Resin+ 50 Part Hardner
  • Gel Time (in Minutes) in Bulk: 30-40 minutes.
  • Gel Time in Thin Coatings: 3-4 Hours
  • Full Cure Time :24 Hours
  • विशेष रूप से ईटालियन, कटनी एवं अलास्का हेतु निर्मित।
  • 150 UV बड़े व् छोटे क्रैक को मजबूती के साथ भरती है तथा नेचुरल फिगर को उभरता है एवं यह रेजीन लाइन मशीनो के लिए विशेष उपयोगी है।